pinouts for terminal server
Copyright 2002, 2003 Andy Barclay
OpenContent License (OPL)
When connecting a headless sun server to an Etherlite terminal server,
use the following cabling pin-outs:
Etherlite RJ-45 to Sun server DB-25
===================================
When looking at the female RJ-45 to DB-25 modular adapter, from the RJ-45
side, the wires are numberred:
1 2 3 4 5 6 7 8
---------------
| |
| |
----| |----
|_____|
To wire the modular adapter for connection to a sun console port (DB-25),
RJ-45 DB-25
-------------
1 5
2 6
3 20
4 2
5 3
6 7
7 8
8 4
**************************************************
Etherlite RJ-45 to Sun server RJ-45 (Netra)
===========================================
When looking at the ends of the male RJ-45 cable that will be used to
connect the etherlite to the netra, the wires are numberred:
8 7 6 5 4 3 2 1
---------------
| |
| |
----| |----
|_____|
EtherLite Netra
---------------------
1 8
2 7
3 2
4 3
5 6
6 4
7 5
8 1
**************************************************
Lantronix to Netscreen 5XP
Lantronix to Alteon
==========================
You will need an RJ-45 to DB-9(Male) converter and either an
ethernet cable or a rolled cable.
The RJ-45 to DB-9 converter
/ /
/ /
--------------
| |
| --------- |
| | | |
| |_ _| | /
| |___| |/
--------------
1 2 3 4 5 6 7 8
With a twisted-pair Ethernet cable, use TYPE 1
With a rolled cable use TYPE 2 (a rolled cable is a crossover or a
cisco console cable, or a modular line cord [for telephones])
TYPE 1
RJ-45 DB-9
---------------------
1 7
2 4
3 3
4 5 yeah, thats right.... tie both these to 5
5 5
6 2
7 6
8 8
9
TYPE 2
RJ-45 DB-9
---------------------
1 8
2 6
3 2
4 5 yep again, tie both these to 5
5 5
6 3
7 4
8 7
**************************************************